AT&T Synapse Installation Manual page 103

 To set up Direct Inward Dial numbers: (Continued)
Figure 112. DID Configuration, Part 2
System Configuration
Synapse Installation Guide
3. As shown in Figure 112, select the Outgoing Caller ID
for all Extensions. The outgoing caller ID is the Synapse
user's name and phone number that appears on the
destination telephone if it is set up to receive and display
the information.
Select Per Extension (local setting) to have each
extension send either the DID or System Pilot Number for
the caller ID number. To set the phone number, see the
Extension Settings menu. For more information, see the
Synapse Administrator's Guide.
Select System Pilot Number (global setting) to have
each extension send the System Pilot Number for the
caller ID number.
4. Enter the System Pilot Number. The System Pilot
Number is usually the company's main telephone number.
102