AT&T Synapse Installation Manual page 45

[
To connect the T1 Gateway T1 cable:

Plug the black T1 cable into the Gateway T1 Port, as shown in Figure 24, and into your T1/PRI network device from your service
provider.
Do not make any calls until the POWER and the SYN/ACT LEDs are green. See
The SB67060 T1 Gateway must use only No.26 AWG or larger Telecommunications line cord to reduce the risk of
fire.
For customer service or product information, visit our website at
1 (888) 916-2007
T1 Status Indicators
Installation
Synapse Installation Guide
1 (888) 883-2474
. In Canada dial
T1 Port
Figure 24. T1 Gateway Line Connections
"T1 Gateway Features" on page
www.telephones.att.com/smb
.
44
67.
or call