T1 Gateway Features
Figure 56 illustrates the T1 Gateway features and connections.
1. Display
2. Reset
3. T1 Port
4. RJ-45 Ethernet Network Port
5. DC 12V Power-Supply Jack
Getting Started
Synapse Installation Guide
1
2
Figure 56. T1 Gateway Features and Connections
Provides system and network status, device information, and configuration data. See
"Gateway Front Panel Interface" on page
When pressed momentarily, restarts the Gateway.
When pressed and held for more than five seconds and with the LAN cable not connected,
restores factory defaults.
10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
67
3
4
69.
5