Tl7600 Cordless Headset Installation; Charger Installation - AT&T Synapse Installation Manual

TL7600 Cordless Headset Installation

The TL7600 cordless headset requires registration to an SB67030 Deskset. The SB67020 does not support the TL7600
cordless headset.

Charger Installation

To install the TL7600 charger:

Power Jack
Figure 48. Charger Installation
Installation
Synapse Installation Guide
1. Plug the small end of the charger power adapter into the jack on the underside
of the charger, then route the cord through the slot as shown in Figure 48.
2. Plug the large end of the charger power adapter into an AC wall outlet not
controlled by a wall switch.
61