AT&T Synapse Installation Manual page 47

To attach the Desktop Stand for desktop installation:
Option 1 Option 2
Figure 26. Deskset Stand Options
Flexible tabs
Solid tabs
Flexible tabs
Solid tabs
Figure 27. Deskset Stand Installation
Installation
Synapse Installation Guide
1. Select a Deskset position. The desktop setup requires the Deskset
Stand and provides two positions, Option 1 at 45° and Option 2 at
60°, as shown in Figure 26. If you use Option 2, rotate the Handset
tab as explained in
Option 2 installation:" on page 47
2. Place the Deskset on a flat surface with the power and network ports
facing you, as illustrated in Figure 27.
3. Place the stand, illustrated
in Figure 28, on the base
with the flexible tab side
away from you.
4. Insert the solid tabs of the
stand into the Option 1 or
Option 1
Option 2 slots on the base
that are marked in red in
Figure 27.
Option 2
5. Rotate the stand away from you until it rests against the base and
you hear a click as the flexible tabs lock into place.
46
"To rotate the Handset tab for wall and Deskset
Flexible Tabs
Figure 28. Deskset Stand Tabs