Transfer Roll Assembly And Left Transfer Support Bearing Removal; Upper (Mpf) Housing Assembly (With Paper Flag) Removal - Lexmark X422 Laser MFP Service Manual

7001–001
Transfer roll assembly and left transfer support bearing
removal
Note: Do not touch the transfer roll except on the ends.
1. Remove the print cartridge.
2. Unlatch and lift the left side support bearing.
3. Unlatch and lift the right transfer support bearing.
4. Remove the transfer roll.
Note: After reinstalling the transfer roll, use a thin screwdriver
to push the copper tab on the right side fully into the slot.
Upper (MPF) housing assembly (with paper flag)
removal
1. Open the front cover.
2. Remove two screws holding the assembly.
3. Carefully, lift the assembly out. A sensor flag is attached.
4-66
Service Manual