Replacing Paper - Epson SureColor SC-F6300 Series User Manual

SC-F6300 Series User's Guide
Use only the distance between the center symbols
or the average of the distances between the left,
center, and right symbols.
G
Press the y button to return to the menu. Press
the d/u buttons to select the value measured
with the scale, and then press the Z button to
return to ready status.
Basic Operations

Replacing Paper

This section describes how to replace paper. The
procedure is displayed on the control panel screen.
Follow these instructions.
Buttons that are used in the following settings
A
Confirm that the printer is ready and press the
( button.
The Load/Remove Paper menu is displayed.
B
Press the d/u buttons to select roll paper, and
then press the Z button.
Note:
To perform Roll Paper Remaining, you must enter
the length of the roll paper when the roll paper is set.
In order to perform accurate remaining roll paper
management, we recommend opening the . tab
and recording the amount of roll paper remaining
when you replace the roll paper.
C
The roll rewinds automatically.
Note:
When the display shows Turn roll paper adapter
to wind up roll paper, rewind the paper by hand.
D
Follow the on-screen instructions to load the roll
paper for the next job.
34