Screen View - Epson SC-F6200 Series User Manual

SC-F6200 Series/SC-F6000 Series
Displays the Maintenance menu, which is used for
nozzle checks and head cleaning.
"Adjusting the Print Head" on page 69
U
L
Wbutton (Pause/Cancel button)
❏
The printer enters pause status if this is pressed while
printing. To release the pause status, press the W
button again, or select Pause Cancel on the screen
and then press the Z button. To cancel print jobs
being processed, select Job Cancel on the screen and
then press the Z button.
❏
Pressing this button while a menu is displayed closes
the menu and returns the printer to ready status.
M
) button (Feed/Cut Paper button)
❏
This button is used with roll paper only.
❏
It is used to manually cut roll paper using the built-in
cutter.
"Manual cut method" on page 27
U
❏
If printing is not currently in progress and the printer is
loaded with roll paper, you can feed paper ahead by
pressing first this button and then the d button. Press
the u button to rewind. Keep the d button pressed to
feed the paper up to 3 m. Keep the u button pressed to
rewind the paper up to 20 cm.
When the u button is used to rewind roll paper, the
paper will pause when the end of the roll reaches the
starting print position. Release the button and then
press it again to resume.

Screen View

The illustration shows the display for the SC-F6200
Series.
A
Message
User's Guide
Introduction
B
C
16
Displays the printer's status, operation, and error
messages.
"What to Do When a Message Is Displayed" on
U
page 74
Printing Paper Feed Adjust information
Displayed when an adjustment value has been en‐
tered during printing.
"Performing Adjustments During Printing" on
U
page 35
Tabs/Info Display Area
The following 5 tabs are displayed in this area.
Use the l/r buttons to select a tab.
Information on the selected tab appears in the info
display area.
, : The Print Queues Tab
This tab displays print job status and can be
used to access the Print Job menu.
The Info Display Area
The print queues tab info display area shows
the name of the current print job.
When using the SC-F6000 Series, pressing the
Z or Menu button when this tab is selected
displays the Print Job menu.