Loading Paper In The Multi Purpose Tray - Kyocera TASKalfa 2551ci Operation Manual

Preparation before Use > Loading Paper

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m
2
(80 g/m ) lager than A4.
The multi purpose tray accepts paper sizes from A3 to A6-R and Hagaki and from Ledger to Statement-R, 8K, 16K and
16K-R. Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT
When using media types other than plain paper (such as recycled or colored paper), always specify the media
type and paper weight settings.
Specifying Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-28)
Media Type Setting (page 8-13)
If you are using a paper weight of 106 g/m
paper you are using.
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m
• B4 or larger plain paper (80 g/m
• Hagaki: 20 sheets
• OHP film: 10 sheets
• Envelope DL, Envelope C4, Envelope C5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9),
Envelope #6 (Commercial #6), Monarch, Youkei 4, Youkei 2: 10 sheets
• Heavy paper (106 to 256 g/m
NOTE
When you load custom size paper, enter the paper size by referring to
Multi Purpose Tray (MP Tray Setting) on page
When you use special paper such as transparencies or thick paper, select the media type by referring to
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page
1
2
or more, set the media type to Thick and set the weight of the
2
), recycled paper or color paper: 100 sheets
2
), recycled paper or color paper: 25 sheets
2
): 10 sheets
3-28.
Open the multi purpose tray.
When loading paper sizes from A3 to B4 and Ledger to Legal, extend the support tray section
of the multi purpose tray until the "∆" mark is fully appeared.
Specifying Paper Size and Media Type for the
3-23
2
) or up to 25 sheets of plain paper
Specifying
3-28.