Display For Originals And Paper; Display Of Keys That Cannot Be Set - Kyocera TASKalfa 2551ci Operation Manual

Preparation before Use > Touch Panel Display

Display for Originals and Paper

The copy screen displays the selected paper source and output tray.
Shows an image of the
output paper.
Original :Shows the original
size when the
original is placed.
Zoom : Shows the
magnification of
the document to
be printed.
Paper : Shows the size of
the output paper.

Display of keys that cannot be set

Keys of features that cannot be used due to feature combination restrictions or non-installation of options are in a non-
selectable state.
NOTE
If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In this case, press the
[Reset] key and try again.
If the key is still grayed out after the [Reset] key is pressed, it is possible that you are prohibited from using the
function by user control. Check with the administrator of the machine.
Copy Image
Preview
Place original.
Original : ---
Original : A4
Zoom : 100%
Zoom : 100%
---
Paper :
Paper : A4
Cancel Detail
Status
Normal
Staple
/Punch
In the following cases, the key
is grayed out and cannot be
selected.
• Cannot be used in
combination with a feature
that is already selected.
• Use prohibited by user
control.
• [Preview] has been
pressed.
(Refer to
on page
Output
tray
Paper
Selection
1-sided
>>1-sided
Org./Paper/ Layout/Edit
Finishing
Grayed out
Staple
/Punch
Original Preview
3-9)
3-8
Copies
Original
position
Paper
source
Staple
/Punch
Advanced
Setup
2013/10/10 10:10
Remaining amount Clock
of toner
Hidden
Staple
/Punch
Cannot be used because an
option is not installed.
Example: When a 1,000-Sheet
Finisher is not
installed, [Staple/
Punch] does not
appear.