System/Network - Kyocera TASKalfa 2551ci Operation Manual

System Menu > Default Setting on the Machine (System Menu)

System/Network

Configure machine system settings.
Network

System/Network

Configure network settings.
Host Name
Item
Host Name
TCP/IP Setting
Item
TCP/IP
IPv4
IP Address
Subnet Mask
Default Gateway
DHCP
Auto-IP
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Network
Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-42)
Select whether to use TCP/IP Protocol.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to
[On].
Set the IP addresses.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
Set the IP subnet masks.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
Set the IP gateway addresses.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
8-42
Description
Description