Kyocera TASKalfa 2551ci Operation Manual page 247

Using Various Functions > Functions Available on the Machine
Tab
Layout/Edit
Configure the settings
for duplex printing and
stamp.
Advanced
Setup
Configure the settings
for continuous
scanning, mirror
image copies, and
Skip Blank Page
function.
Function key
Adjusts the zoom to reduce or enlarge the image.
Zoom
Combines 2 or 4 original sheets into 1 printed page.
Combine
Margin:
Margin/Centering
Centering: Centers the original image on the paper
Erases the black border that forms around the image.
Border Erase
Prints documents to 2-sided open book sheets.
Booklet
Produces two-sided copies.
Duplex
You can also create single-sided copies from two-sided
originals or originals with facing pages such as books.
Adds a cover to the finished documents.
Cover
Prints the original document overlaid with a form or
Form
image.
Adds page numbers to the finished documents.
Page #
Delivers copies with a space for adding notes.
Memo Page
Separates and copies an enlarged image onto multiple
Poster
pages to make copies larger than the maximum paper size.
Tiles the original image on one sheet of paper.
Image Repeat
You can add a text stamp on the documents.
Text Stamp
You can add a bates stamp on the documents.
Bates Stamp
Scans a large number of originals in separate batches
Continuous Scan
and then produce as one job.
Automatically rotates the image 90 degrees when the
Auto Image Rotation
sizes of the original and the loaded paper matches but
the orientations are different.
Inverts black and white portions of the image for
Negative Image
printing.
Copies the mirrored image of the original.
Mirror Image
Sends E-mail notice when a job is complete.
Job Finish Notice
Adds a file name.
File Name Entry
Suspends the current job and gives a new job top priority.
Priority Override
Enables additional copies in the desired quantity as
Repeat Copy
necessary after a copy job is completed.
When printing to sheets of transparency, automatically
OHP Backing Sheet
inserts a paper between them.
When the document processor is used, select the
DP Read Action
scanning operation for the document processor.
When there are blank pages in a scanned document,
Skip Blank Page
this function skips the blank pages and prints only
pages that are not blank.
Description
Add margins (white space). In addition,
you can set the margin width and the back
page margin.
when copying onto paper different from the
original size.
6-3
Reference
page
page 6-31
page 6-35
page 6-37
page 6-38
page 6-40
page 6-42
page 6-45
page 6-46
page 6-47
page 6-49
page 6-50
page 6-51
page 6-52
page 6-54
page 6-56
page 6-57
page 6-57
page 6-57
page 6-58
page 6-58
page 6-59
page 6-59
page 6-60
page 6-61
page 6-61