Wsd Scan/Dsm Scan - Kyocera TASKalfa 2551ci Operation Manual

Operation on the Machine > Sending

WSD Scan/DSM Scan

WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE
To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected, and
WSD Scan on page 8-44
For information on operating the computer, refer to the computer's help or the operation guide of your software.
Installing Driver Software (for Windows 7)
1
2
is set to [On] in the network settings.
Click the [Start] button on the Windows, and then click
[Network].
In Windows 8, select the Desktop in the Start screen and click [Libraries], and then
[Network].
NOTE
When [Network] does not appear in the Start menu, perform the following procedure.
1
Right-click [Start] and click [Property] in the menu that appears.
2
Select the [[Start] menu] tab in the
click [Customize].
3
When the "Customize [Start]
and click [OK].
Install the driver.
Right-click the machine's icon (Kyocera:TASKalfaXXX:XXX) and then click [Install].
NOTE
If the "User Account Control" window appears, click [Continue].
If the "Found New Hardware" window appears, click [Cancel].
During the installation, double-click the icon shown on the task bar to display the
Installation" screen. When
Software
[Driver Software Installation] screen, the installation is completed.
"Task bar and [Start] menu
menu" screen appears, select the "Network" check box
"Your devices are ready to
5-37
properties" screen, and
"Driver
use" is displayed on the