Collate/Offset - Kyocera TASKalfa 2551ci Operation Manual

Using Various Functions > Functions

Collate/Offset

Org./Paper/
Copy
Finishing
Offsets the output by page or set.
Item
Collate
Without 1,000-Sheet Finisher (Option)
Offset
With 1,000-Sheet Finisher (Option)
* If [Off] is selected for "Collate" setting, [Each Page] appears. When [On] is selected, [Each Set] appears.
Functions
Custom
Memory
Box
Image
USB Functions
Scans multiple originals and delivers complete sets of copies
as required according to page number.
When offsetting is used, printed copies are produced after
rotating each set (or page*) by 90 degrees.
NOTE
To use offsetting, the same size of paper as the selected paper
tray must be loaded in a different orientation in a different
paper tray.
The paper sizes supported in Offset are A4, B5, Letter and 16K.
When you use offsetting, printed copies are segregated after
each set of copies (or after each page*).
NOTE
The optional 1,000-Sheet Finisher is required.
The paper sizes supported in Offset are A3, B4, A4, B5, Letter,
Legal, Ledger, Oficio II, 8K, 16K, and 216 x 340 mm.
6-17
Description