Loading Paper In The Multi Purpose Tray - Kyocera TASKalfa 420i Operation Manual

Preparation before Use

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 200 sheets of plain paper (80 g/m
The multi purpose tray accepts paper sizes from A3 to A6 and Hagaki and from Ledger to Statement-R, 8K, 16K
and 16K-R. Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT:
specify the media type setting. (Refer to Specifying Paper Size and Media Type for the Multi Purpose Tray on
page 2-28.) If you are using a paper weight of 106 g/m
The capacity of the multi purpose tray is as follows.
• Hagaki: 80 sheets
• OHP film: 25 sheets
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Monarch, Youkei 4, Youkei 2: 20 sheets
NOTE:
When you load custom size paper, enter the paper size by referring to Specifying Paper Size and
Media Type for the Multi Purpose Tray on page 2-28.
When you use special paper such as transparencies or thick paper, select the media type by referring to
Specifying Paper Size and Media Type for the Multi Purpose Tray on page 2-28.
2-22
Downloaded from www.Manualslib.com
When using media types other than plain paper (such as recycled or colored paper), always
manuals search engine
5
Insert the appropriate paper size card in the slot to
indicate the size of the paper inside.
6
Gently push the cassette back in.
NOTE:
If the machine will not be used for a prolonged
period, protect all paper from humidity by removing it
from the cassettes and sealing it in the paper storage
bag.
7
Select the media type (plain, recycled, etc.) loaded
in the cassette. (Refer to Specifying Paper Size
and Media Type for the Cassettes on page 2-26.)
2
).
2
or more, set the media type to Thick.
OPERATION GUIDE