Energy Saver Function; Low Power Mode And Auto Low Power Mode - Kyocera TASKalfa 2551ci Operation Manual

Installing and Setting up the Machine > Energy Saver function

Energy Saver function

If a certain period of time elapses after the machine is last used, the machine automatically enters Low Power Mode to
reduce power consumption. If a further period of time elapses without the machine being used, the machine
automatically enters sleep mode, which minimizes power consumption.

Low Power Mode and Auto Low Power Mode

Low Power Mode
To activate Low Power Mode, press the
go out to save power except the
Power Mode.
When the [Power] key is pressed in low power mode, the machine enters the sleep state.
If print data is received during Low Power Mode, the machine automatically wakes up and starts printing. Also when fax
data arrives while the machine is in Low Power Mode when using the optional fax, the machine automatically wakes up
and starts printing.
To resume, perform one of the following actions.
• Press the touch panel or any key other than the [Power] key.
• Open the platen cover or the optional document processor.
• Place originals in the optional document processor.
The machine will be ready to operate within 10 seconds.
Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly.
Auto Low Power Mode
Auto Low Power Mode automatically switches the machine into Low Power Mode if left idle for a preset time.
The default preset time is 3 minutes.
For information on the Low Power Mode settings, refer to
Energy Saver Recovery Level
This machine can reduce power consumption when recovering from Energy Saver Mode.
For EnergySaver RecoveryLevel, "Full Recovery", "Normal Recovery" or "Power Saving Recovery" can be selected.
The factory default is "Normal Recovery".
For more information on Energy Saver Mode settings, refer to
[Energy Saver] key. Touch panel and all indicators on the operation panel will
[Energy Saver], [Power], and Main Power indicators. This status is referred to as Low
Main Power
indicator
Quick Setup Wizard on page
Quick Setup Wizard on page
2-31
2-34.
2-34.