Kyocera TASKalfa 2551ci Operation Manual page 460

Troubleshooting > Troubleshooting
Message
Staple is empty.
Staple jam.
System error.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
T
Message
The cover is open.
The password does not
meet password policy.
The print system
connected to the current
port is not supported by
the printer driver.
Use a printer driver for
this port that matches
the print system.
The removable memory
is not formatted.
The slit glass requires
cleaning.
This user account is
locked out.
Checkpoints
*
Has the staple cartridge holder run
out of staples?
—
—
Checkpoints
Is there any cover which is open?
Is the password expired?
Is the password policy requirement
(such as password length or
required characters) changed?
Is the printer driver for this product
used?
Is the removable memory formatted
by this machine?
—
—
Corrective Actions
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the screen. Leave the machine on
and follow the instructions to
replace the staple case. Press
[Continue] to print without stapling.
Press [Cancel] to cancel the job.
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instructions to remove the
jammed staple.
System error has occurred. Follow
the instructions on the screen.
Corrective Actions
Close the cover indicated on the
screen.
Change the login password.
The job is canceled. Press [End].
Confirm the password policy
requirements and change the login
password.
The job is canceled. Press [End].
Check the product name of the
machine and reinstall the printer
driver.
Perform [Format] on this machine.
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
Contact administrator.
The job is canceled. Press [End].
10-26
Reference
Page
page 10-11
page 10-49
—
Reference
Page
―
page 9-7
page 9-8
page 9-7
page 9-8
—
―
page 10-3
―