Command Center Rx - Kyocera TASKalfa 2551ci Operation Manual

Installing and Setting up the Machine > Command Center RX

Command Center RX

If the machine is connected to the network, you can configure various settings using Command Center RX.
This section explains how to access Command Center RX, and how to change security settings and the host name.
For details on Command Center RX, refer to the Command Center RX User Guide.
NOTE
To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login].
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
Login User Name
Login Password
* Upper case and lower case letters are distinguished (case sensitive).
Settings that the administrator and general users can configure in Command Center RX are as follows.
Setting
The machine's structure can be checked.
Device
[Configuration], [Counter],
Information
Displays all device information, including print and scan jobs, storing jobs,
Job Status
scheduled jobs, and job log history.
[Printing Jobs
[Scheduled
[Storing Job
Add or delete document boxes, or delete documents within a document box.
Document Box
[Custom
Create, edit, or delete addresses and address groups.
Address Book
[Machine Address
[One Touch
Configure the advanced settings of the machine.
Device Settings
[Paper/Feed/Output],
[System]
Configure the advanced function settings.
Function Settings
[Common/Job
[DSM
[Operation
Configure the network advanced settings.
Network Settings
[General], [TCP/IP], [Protocol]
Configure the security advanced settings.
Security Settings
[Device
Configure the advanced management settings.
Management
[Job
Settings
[History
*1 Displayed only when the optional FAX Kit is installed.
*2 The logged in user may not be able to configure some settings, depending on the permissions of the user.
NOTE
The optional FAX Kit is required in order to make use of fax functionality.
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the FAX
Operation Guide.
Admin
Admin
[About Command Center
[Printing Job
Status],
[Sending Job
Jobs],
Log]
1
[FAX , [Polling
Box], Box]*
[External Address Book
Book],
Key]
[Original
Defaults], [Copy], [Printer], [E-mail],
1
[FAX / , [Send and
Scan], i-FAX]*
Panel]
[Send
Security], Security],
Accounting], [Authentication],
Settings], [SNMP], [System
Description
RX]
[Sending Job
Log],
[Storing Job
Log], Status],
1
, [Job Box
Box]* Settings]
Settings],
[Energy Saver/Timer], [Date/Time],
Settings],
[Scan to
1
, [RX/Forward
Forward]*
[Network Security], [Certificates]
[ID Card], [Notification/Report],
[Message Board], [Reset]
Stamp],
2-39
Administ-
rator
Status],
Folder],
Rules],
General
User
❍ ❍
❍ ❍
❍ ❍* 2
❍ ❍* 2
❍
-
❍ -
❍
-
❍ -
❍ -