JUKI DDL-8700A-7 Instruction Manual page 42

!5 Holding time of lifting presser foot (Function setting No. 47)
Ths functon automatcally lowers the presser foot when the tme set wth the settng No. 47 has passed after
lftng the presser foot.
When the pneumatc type presser foot lfter s selected, the holdng tme control of lftng presser foot s lmt-
less regardless of the set value.
4 7
!6 compensation of timing of the solenoid for reverse feed stitching (Function setting No. 51 to 53)
When the normal and reverse feed sttches are not unform under the automatc reverse feed sttchng acton, ths
functon can change the ON / OFF tmng of the solenod for back tack and compensate the tmng.
1 Compensaton of on-tmng of solenod for reverse feed sttchng at the start of sewng (Functon settng
No. 5)
On-tmng of solenod for reverse feed sttchng at the start of sewng can be compensated by the unt of angle.
5 1
Set value Compensaton angle
– 36 – 360 ゜
– 8 – 80 ゜
0
8
36
2 Compensaton of off-tmng of solenod for reverse feed sttchng at the start of sewng (Functon settng No. 52)
Off-tmng of solenod for reverse feed sttchng at the start of sewng can be compensated by the unt of angle.
5 2
Set value Compensaton angle
– 36 – 360 ゜
– 8 – 80 ゜
0
8
36
3 Compensaton of off-tmng of solenod for reverse feed sttchng at the end of sewng (Functon settng No. 53)
Off-tmng of solenod for reverse feed sttchng at the start of sewng can be compensated by the unt of angle.
5 3
Set value Compensaton angle
– 36 – 360 ゜
– 8 – 80 ゜
0
8
36
Settng range
6 0
0 to 600 sec <0 / sec>
Adjustng range
1 2
– 36 to 36 <1 / 10˚>
Number of sttches of compensaton
0 ゜
80 ゜
360 ゜
Adjustng range
1 8
– 36 to 36 <1 / 10˚>
Number of sttches of compensaton
0 ゜
80 ゜
360 ゜
Adjustng range
1 6
– 36 to 36 <1 / 10˚>
Number of sttches of compensaton
0 ゜
80 ゜
360 ゜
– 
– 360˚
– 0.5
– 180˚
0
0.5

– 
– 0.5
0
0.5

– 
– 0.5
0
0.5

– 39 –
* When the point
before 1 stitch is
regarded as 0˚,
compensation is
possible by 360˚ (1
0˚
180˚
stitch) in front and in
360˚
the rear.
– 360˚
– 180˚
0˚
180˚
360˚
– 360˚
– 180˚
0˚
180˚
360˚