JUKI DDL-8700-7 Specification

The issue described suggests that the presser foot is in the up position, possibly due to the auto-lifter function. Here’s how to address it:

1. Check the Auto-Lifter Mechanism: The JUKI DDL-8700-7 may have an auto-lifter installed. Ensure it is functioning correctly and not stuck in the raised position. If necessary, turn off the machine and manually lower the presser foot.

2. Inspect the Presser Foot Lever: Confirm that the lever on the back of the machine is not disabled or obstructed. If it is, clear any obstructions and try activating the lever again.

3. Reset the Machine: Turn the machine off and back on to reset the electronic systems. This may resolve any temporary glitches.

4. Check Settings: If the machine has programmable settings for the presser foot or needle, review the user manual to ensure they are configured correctly.

If the problem persists, consult the machine's manual or contact a technician for further assistance.

This answer is automatically generated