Connector Layout Drawing - JUKI DDL-8700A-7 Instruction Manual

3. connector layout drawing

WarNING :
• to protect against personal injury resulting from abrupt start of the sewing machine, be sure to
turn the power OFF, unplug the machine and wait for five minutes or more before connecting the
connectors.
• to prevent damage of device caused by maloperation and wrong specifications, be sure to
connect all the corresponding connectors to the specified places. (If any of the connectors is
inserted into a wrong connector, not only the device corresponding to the connector can break
but also it can start abruptly, inviting the risk of personal injury.)
• to prevent personal injury caused by maloperation, be sure to lock the connector with lock.
• as for the details of handling respective devices, read carefully the Instruction Manuals supplied
with the devices before handling the devices.
Followng connectors are prepared on the front face of MAIN board.
Connect the connectors coming from the machine head to the corresponding places so as to fit the devices
mounted on the machne head.
1 CN2 : Connector for relay cord
2 CN34 : Pedal sensor
3 CN30 : Motor encoder
4 CN60 : Machne head panel
5 CN38 : CP/IP panel
6 CN39 : Standng-work machne
7 CN57 : Producton control
8 CN54 : OPTION INPUT
9 CN50 : OPTION I/O
!0 CN : Regeneratve resstance
!1 CN52 : CPU INSYSTEM
!2 CN53 : JTAG
!3 CN36 : Machne head solenod
!4 CN37 : Presser foot lfter solenod
!5 CN58 : Fan
!6 CN55 : LED lght
!7 Motor cable
!8 Panel cable
!9 Power cord
– 53 –