JUKI DDL-8700A-7 Specifications

DDL-8700A-7
Direct-drive, High-speed, 1-needle, Lockstitch Machine
with Automatic Thread Trimmer
The sewing machine has been integrated
and the operation panel for ease of use.
Features
The direct drive system has been adopted.
Both the control box and the operation panel
are integrated with the machine head.
Maximum sewing speed 5,000 sti/min
(for medium-weight materials)
Enhanced energy-saving performance
The new model with the direct-drive system has been developed based on the DDL8700-7 machine head.
The machine demonstrates improved responsiveness to promise stress-free operation.
In addition, the control box and operation panel are integrated with the motor cover of the machine head, to simplify the setup procedure.
V-belt
type
DDL-8700-7/SC-920
Comparison mode: Relative to the power consumed in four seconds, including the time required for sewing 100 stitches (including eight reverse-feed stitches each
at the beginning and end of sewing) and the standby time (with the energy-saving mode OFF)
JUKI ECO PRODUCTS
with the control box
25%
Enhanced energy-saving performance
OFF
The new-model compact-sized servomotor has been installed in
the direct-drive style. The new-model servomotor improves
Direct-drive
energy consumption and achieves increased speed and torque.
type
As compared with the belt-driven DDL-8700-7, the DDL-8700A-7
achieves a reduction of power consumption by 25 %.
DDL-8700A-7
The DDL-8700A-7 is an eco-friendly product which complies with JUKI ECO PRODUCTS standards
for protecting the environment.
•
This sewing machine reduces power consumption by 25% as compared with the conventional models.
•
The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous
substances, which is stricter than other restrictions, such as those of the RoHS Directive.
For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.jp/eco_e/index.html
The RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical
*
and electronic equipment.
The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which
also adversely affect the environment.
DDL-8700AS-7-WB