JUKI DDL-8700A-7 Instruction Manual page 29

Sewing can be performed with the production support data displayed on the control panel.
[Basic operation of the production support modes]
A
3 4
4) When you keep
off. While they are flashing on and off, data marked with (*2) in Table 1 "Display under modes" can be
changed by pressing
When you press
flashing on and off.
5) The value with a sharp mark (*3) in Table 1 "Display of modes" can be changed only immediately after
resetting by using
6) Refer to the table "Mode resetting operation," for the resetting procedure of data.
7) To return to the normal sewing state, press
Data to be displayed under the respective modes are as described in the table below.
Table 1: Display of modes
Mode name
Target No. of pcs. display
mode (F100)
Target/actual No. of pcs. dif-
ference display mode [F200]
Sewing machine availability
rate display mode (F300)
Pitch time display mode
(F400)
Average number of revolu-
tions display mode (F500)
B o b b i n c o u n t e r d i s p l a y
mode
7
E
B
5
6
switch 6 held pressed for two seconds, indicator
switch 5 and
switch 7 , the value marked with (*2) is confirmed and indicator
switch 5 and switch 6 .
Indicator A
Actual number of pieces (Unit
: piece) (*1)
Difference between target
number of pieces and actual
number of pieces (d : piece)
(*1)
oP-r
Pi-T
ASPd
bbn
1) When switch 7 is pressed in the normal
sewing state, LED E lights up to enter the pro-
duction support mode.
2) Production support function can be changed
over by pressing
3) Data attached marked with (*1) in Table 1 "In-
dicator " can be changed by means of
A
switch 5 and
switch 6 .
switch 7 .
Indicator B
Target number of pieces (Unit
: piece) (*2)
Target pitch time
(Unit : 100 msec) (*2)
Sewing machine availability
rate in the previous sewing
(Unit : %)
Pitch time in the previous
sewing (Unit : 1sec)
Average number of revolu-
tions in the previous sewing
(Unit : sti/min)
Bobbin counter value (*3)
– 26 –
switch 3 or
switch 6 .
and LED flash on and
B E
and LED
B
Indicator B (when
switch 5 is pressed)
-
-
Display of average avail-
ability rate of sewing
machine (Unit : %)
Display of average pitch
time (Unit : 100 msec)
Display of average number
of revolutions
(Unit : sti/min)
-
switch 4 .
stop
E