JUKI DDL-8700A-7 Instruction Manual page 30

table 2: Mode resetting operation
Mode name
Target No. of pcs. dsplay mode
(F00)
Target/actual No. of pcs. dfference
dsplay mode (F200)
Sewng machne avalablty rate
dsplay mode (F300)
Ptch tme dsplay mode (F400)
Average number of revolutons
dsplay mode (F500)
Bobbn counter dsplay mode
[Detailed setting of production volume management function (F101, F102)]
1 2
3 4
swtch 5 or swtch 6 n the settng state of the number of tmes of thread trmmng (F0).
It s possble to set whether the buzzer sounds or not when the actual number of peces has reached the tar-
get volume by pressng
(F02).
Swtch 5 (held pressed for 2
seconds)
Resets the actual number of peces
Resets the dfference between target
number of peces and actual number
of peces
Resets the actual number of peces
Resets the dfference between target
number of peces and actual number
of peces
Resets average avalablty rate of
sewng machne
Resets average ptch tme
Resets average number of revolu-
tons of sewng machne.
Resets the bobbn counter value
(Note that only the bobbn counter s
mmedately reset by pressng
swtch 5 .)
7
5
6
swtch 5 or swtch 6 n the settng state of the target achevement buzzer
– 27 –
Swtch 5 (held pressed for 4 sec-
onds)
-
-
Resets average avalablty rate of sewng
machne.
Resets average ptch tme.
Resets average number of revolutons of
sewng machne.
Resets average avalablty rate of sewng
machne.
Resets average ptch tme.
Resets average number of revolutons of
sewng machne.
Resets average avalablty rate of sewng
machne.
Resets average ptch tme.
Resets average number of revolutons of
sewng machne.
-
When swtch 7 s held pressed (for three sec-
onds) under the target No. of pcs. dsplay mode
(F00) or the target/actual No. of pcs. dfference
dsplay mode (F200), the detaled settng of the pro-
ducton volume management functon can be carred
out.
The settng state of the number of tmes of thread
trmmng (F0) and that of the target achevement
buzzer (F02) can be changed over by pressng
swtch 3 or swtch 4 .
The number of tmes of thread trmmng for sewng
one pece of garment can be set by pressng