JUKI DDL-8700A-7 Instruction Manual page 34

No. Item
50 Pedal Type of pedal sensor s selected.
specification 0 : KFL
 : PFL
Refer to
5 Compensaton of Compensaton of startng the solenod for reverse feed sttchng
solenod-on tmng when reverse feed sttchng at the start of sewng s performed.
of reverse feed
sttchng at the
start of sewng
52 Compensaton of Compensaton of releasng the solenod for reverse feed sttch-
solenod-off tmng ng when reverse feed sttchng at the start of sewng s per-
of reverse feed formed.
sttchng at the
start of sewng
53 Compensaton Compensaton of releasng the solenod for reverse feed sttch-
of solenod-off ng when reverse feed sttchng at the end of sewng s per-
tmng of reverse formed.
feed sttchng at
the end of sewng
55 Foot lft after Functon of lftng presser foot at the tme of (after) thread trmmng
thread trmmng 0 : Not provded wth the functon of automatc lftng of work-
 : Provded wth the functon of lftng presser foot automatcally
56 Reverse Functon of reverse revoluton to lft the needle at the tme of (af-
revoluton to lft ter) thread trmmng
the needle after 0 : Not provded wth the functon of reverse revoluton to lft
thread trmmng
 : Provded wth the functon of reverse revoluton to lft the
58 Functon Functon of holdng predetermned upper/lower poston of the needle bar
of holdng 0 : Not provded wth the functon of holdng predetermned
predetermned
upper/lower  : Provded wth the functon of holdng predetermned upper/
poston of the
needle bar 2 : Provded wth the functon of holdng predetermned upper/
3 : Provded wth the functon of holdng predetermned upper/
59 Functon of Auto/ Ths functon can specfy the sewng speed of reverse feed
Manual change-
sttchng at the start of sewng.
over of reverse
0 : The speed wll depend on the manual operaton by pedal, etc.
feed sttchng at
 : The speed will depend on the specified reverse feed stitching speed (No. 8).
the start of sewng
60 Functon of stop Functon at the tme of completon of reverse feed sttchng at
mmedately after the start of sewng
reverse feed 0 : Not provded wth the functon of temporary stop of the
sttchng at the
start of sewng
 : Provded wth the functon of temporary stop of the sew-
64 Change- Intal speed when startng condensaton sttch or EBT
over speed of
condensaton
sttch or EBT (end
back tack)
70 Functon of soft- Presser foot s slowly lowered.
down of presser
foot
7 Double reverse Effectve/neffectve of double reverse feed sttchng s changed
feed sttchng
over.
functon
0 : Ineffectve
 : Effectve
72 Sewng Current limit at the startup of sewing machine is specified.
machne startup 0 : Normal (Current lmt s appled durng startup)
selectng  : Rapd (Current lmt s not appled durng startup)
functon
73 Retry functon Ths functon s used when needle cannot perce materals .
0 : Re-try functon s not provded
 - 0: Re-try functon s provded
(Needle-bar returnng force before re-tryng:  (small) - 0 (large))
76 One-shot functon One-shot operation up to the material end is specified.
0 : One-shot operaton s not performed.
 : One-shot operaton s performed.
Sucton moton tme of presser foot lftng solenod
84 Intal moton
sucton tme of
*
presser foot lftng
solenod
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions.
Descrpton
"#-10. Selection of the pedal specifications"
clamp after thread trmmng
after thread trmmng
the needle after thread trmmng
needle after thread trmmng
upper/lower poston of the needle bar
lower poston of the needle bar (holdng force s weak.)
lower poston of the needle bar (holdng force s medum.)
lower poston of the needle bar (holdng force s strong.)
sewng machne at the tme of completon of reverse feed
sttchng at the start of sewng
ng machne at the tme of completon of reverse feed
sttchng at the start of sewng.
0 : Presser foot s rapdly lowered.
 : Presser foot s slowly lowered.
Settng range
0/
p.43.
– 36 to 36
(0°)
– 36 to 36
(0°)
– 36 to 36
(0°)
0/
0/
0 to 3
0/
0/
0 to 250
(st/mn)
0/
0/
0/
0/
0/
50 to 500
(ms)
– 3 –
Indcaton of functon settng Ref. page
5 0 1
43
5 1 1 2
39
5 2 1 8
39
5 3 1 6
39
5 5 1
40
5 6 0
40
5 8 0
40
5 9 1
40
6 0 0
40
6 4 1 8 0
7 0 0
4
7 1 1
7 2 0
7 3 1
4
7 6 0
33
8 4 2 5 0
4