Built-In Panel Of The Machine Head - JUKI DDL-8700A-7 Instruction Manual

2. Built-in panel of the machine head

A
swtch : Used for changng over effectve/neffectve of the reverse feed sttchng pattern.
1
swtch : Used for changng over effectve/neffectve of the overlapped sttchng pattern.
2
switch : Used for confirming the contents of setting and for changing over effective/ineffective of
3
the reverse feed sttchng at sewng start.
swtch : Used for selectng the process (A, B, C, D) the number of sttches for whch s to be
4
changed.
* The selected process flashes on and off.
switch : Used for changing the content of the selected display (flashing section) and for changing
5
over effectve/neffectve of the reverse sttch at sewng end.
switch : Used for changing the content of the selected display (flashing section).
6
swtch : It s used to call the producton support functon and to call the one-touch settng (t
7
should be held pressed for one second).
Indcators A and B : Varous peces of nformaton are dsplayed.
LED C : Lghts up when the reverse feed sttchng pattern s effectve.
LED D : Lghts up when the overlapped sttchng pattern s effectve.
LED E : Lghts up when the producton support functon s dsplayed.
C 1 D 2
3 4
– 2 –
E 7
5 6
B