JUKI DDL-8700A-7 Instruction Manual page 26

(2) overlapped stitching pattern
Overlapped sttchng pattern can be programmed.
c
a
B B
D
D 2
A
3 4
3) Change the number of sttches for the selected process by usng
4) Press swtch 3 to confirm the change you have made.
(The sewing machine does not run unless the setting has been confirmed by pressing
(caution) the overlapped stitching pattern is carried out under automatic operation mode. once the pedal
is depressed, the sewing machine will automatically perform sewing of the number of overlapped
stitches.
A : Number of sttches of normal sttchng settng
c
0 to 5 sttches
B : Number of sttches of reverse sttchng settng
0 to 5 sttches
C : Number of sttches of normal sttchng settng
0 to 5 sttches
D : Number of tmes of repetton
0 to 9 tmes
(caution) When process D is set to 5 times, the sewing is repeat-
ed as a / B / c / B / c.
B
5
6
– 23 –
[Setting procedure of the overlapped stitching]
) Effectve/neffectve of the overlapped sttchng
pattern can be changed over by pressng
swtch 2 .
When the overlapped sttchng pattern s ren-
dered effectve, LED D lghts up.
2) Select a process (A, B, C or D) the number of
sttches for whch s to be changed by usng
swtch 4 .
The number which is flashing on and off repre-
sents the process whch s beng set.
swtch 5 and swtch 6 .
swtch 3 .)