Checking The Print Image Prior To Making Master [Preview] - Riso RZ1090 User Manual

Functions for Master-Making
Checking the Print Image Prior to Making
Master
You can check what the actual master will look like by previewing an image of the scanned original or an image of
data sent from a computer. This function is handy for checking the layout or final image of a Multi-Up job.
The operation and display timing differ depending upon the mode.
Mode name
(original type)
Printing from the Original
Document
Scan Mode
Printing Original Data
from a Computer
Retrieving Stored Data
and Printing
Note:
• It shows the scanned original as-is. A margin is required when actually printing. Check to make sure that the mar-
gins are sufficient.
• In "Direct Print" operation, [Preview] will be displayed on the Master Making Basic Screen when data is received
from the computer.
p.57
• When in Link mode (when a Linked Printer is connected), the original image after scanning and prior to output from
the Linked Printer is previewed.
94

Checking the Print Image Prior to Making Master [Preview]

[Preview]
When set
When setting functions
related to Master Making
(settings from Functions)
When setting functions
(master making functions)
related to Scanning (setting
from Functions)
Stopping the print job prior to
making a master (Pause
before "Master"/Auto-
process "OFF"), after the
machine has received the
original data
When retrieving stored data
(set on the Storage Basic
Screen)
When to display
After Scanning the
Original
After Scanning the
Original
Displays when touching
[Preview]
Displays when touching
[Preview]
If "Auto Processing" is ON
Scans the original, then
temporarily stops to display
preview.
When in scan mode, an
original is scanned and then
saved, so there is no "Auto
Process" operation.
However, if multiple originals
are placed in an ADF unit,
you can touch [Close] after
reviewing the preview to
start the scan of the next
original.
A preview is not shown if
data is sent from the printer
driver with "Auto Print" "ON".
If you touch [Preview], it
displays immediately.