Printing From Bound Documents [Book Shadow] - Riso RZ1090 User Manual

Functions for Master-Making
Printing from Bound Documents
[Book Shadow]
You can erase the binding "spine" shadow in the center when printing from such bound originals with facing as mag-
azines and books.
The area to be erased (erasure width) can be selected.
Moreover, magazines or books can be spread open on the Glass Platen and their pages printed onto separate sheets.
Important!:
• The original must be placed aligning center on the Glass Platen as shown below.
When erasing the binding shadow or printing an original onto separate sheets by splitting the pages, set the orig-
inal in the direction of A.
A
• The following image areas are also erased (or half-toned).
– A continuous black image area (non-white) from the edge of the original
– A continuous black image area from the center of the original
Note:
• Book Shadow function cannot be used with the following functions.
– Top Margin (when [Page split] is selected)
– Binding margin
– Ink Saving
– Scanning Contrast ([Auto])
– Multi-Up Print
– Scanning Side -ADF
– Layout
• If you use the "Book Shadow" with the Gauge Cover installed, the surrounding image gets black on the master.
If the Gauge Cover is installed, remove the Gauge Cover and then use the "Book Shadow".
• If you are scanning a thick book such as an encyclopedia, raise the hinge of the glass platen cover and press
down for best results.
86

Printing from Bound Documents [Book Shadow]

B