How To Program Print - Riso RZ1090 User Manual

How to Program Print

There are two ways to print in sets using "Program" printing feature.
• Program, then print (without saving the settings)
• Retrieve a saved program, then print (when program is registered)
Choose from the following actions on the Print Basic Screen.
Touch a button to proceed.
Ready to Print
Program-A 03G 3- -
Basic Selections Functions
Print Position
1 8 0 p p m
S i l e n t
0.0 mm
0.0 mm
D-Feed
Renew Page
Check
Black
READY
[Renew Page]: Creates a master from the last Master-Making data.
[Next Page] or [Go to Next]: Stops current print job, skips to the next original, set or group.
[Cancel Job]: Cancels execution of the Program.
Note:
• The optional Job Separator is useful for Programed Printing.
The Job Separator releases a piece of tape after each set or original document, thereby automatically separating
sets or groups. It eliminates the need to manually remove a stack of sheets or insert a marker between sets.
Remember to activate "Job Separation" in the Functions screen when printing with the Job Separator.
You must remove each stack from the Paper Receiving Tray, or insert a marker during the pause if not using the
Job Separator.
Admin.
Paper
Renew Page
Go to Next
A4
Cancel Job
Id le In fo
p.134
p.139
Automatic Sorting Into Groups [Program]
Advanced Features
133