Riso RZ1090 User Manual page 256

Troubleshooting
Message
!! Improper Paper for
Rotation Sorting !!
Set Same Sized Paper in
2 Trays, One in Horizontal
and Other in Vertical
Direction
Invalid Print Drum (Cylinder)
has been Selected
Change Print Drum (Cylinder), or
Reselect Print Drum (Cylinder) Size
!! Layout is not available
with this paper size !!
Replace with proper paper
of standard size
!! Multi-Up is Not Available
with This Paper Size !!
Replace with Proper Paper
of Standard Size
!! No Auto Reproduction
Size Selection with This
Combination of Original
and Printing Paper !!
Select Size Manually
256
When a Message Displays
Symptom/Action
(Symptom)
The proper sized papers for Rotation
Sort are not set in the paper tray.
(Action)
Place the proper sized papers in 2 trays
of the optional Linked Printer, one in
horizontal and other in vertical direction.
(Symptom)
You have selected a different Print Drum
(Cylinder) than the one currently in
place, as confirmed in the Confirm Print
Drum (Cylinder) Type screen when it
was installed.
(Action)
Select the type of Print Drum (Cylinder)
currently installed.
Alternatively, you can change the Print
Drum (Cylinder).
p.231
(Symptom)
Layout functions cannot be used when
custom-sized papers are set in the
Paper Feed Tray.
(Action)
Load standard size paper in the Paper
Feed Tray.
p.36
(Symptom)
Multi-up functions cannot be used when
custom-sized paper is in the Feed Tray.
(Action)
Load standard size paper in the Feed
Tray.
(Symptom)
With the size of set original and printing
paper, auto reproduction cannot be
performed.
(Action)
Modify the reproduction size.
How to Clear a Pop-Up Message
Touch [Close].
(Alternatively, press the
key to clear.)
• When changing a setting;
In the Confirm Print Drum (Cylinder)
Type screen, select the type of Print
Drum (Cylinder) currently installed
and touch [OK].
• When installing a different Print
Drum (Cylinder);
Pull out the Print Drum (Cylinder) and
replace with the correct one.
When the Print Drum (Cylinder) is re-
installed, the Warning Message will
clear.
Touch [Close].
(Alternatively, press the
key to clear.)
Touch [Close].
(Alternatively, press the
key to clear.)
• When changing the "Size" setting;
Touch [Size Setting].
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
key or the
key or the
key or the
key or