Replacing The Master Roll - Riso RZ1090 User Manual

Replacing Consumables

Replacing the Master Roll

When the Master Roll is depleted, a message is displayed and the machine stops. Replace with a new Master Roll.
Important!:
• For the Master Roll, it is recommended to use the products specified by Riso.
• Keep the power ON while replacing the master.
1
Open the Front Cover.
2
Check the indicator of the Master
Making Unit Release Button is ON.
Master Making
Unit Release Button
If the indicator is off, press the Master Making Unit
Release Button to turn it on.
Important!:
• When the Print Drum (Cylinder) is out, Master
Making Unit cannot be pulled out. Return the
Print Drum (Cylinder) into position and press
the Master Making Unit Release Button.
p.231
224
Replacing the Master Roll
p.234
3
Pull out the Master Making Unit.
Master Making Unit
Grasp the Master Making Unit Handle and pull for-
ward.
Pull out slowly until it stops.
4
Open the Master Making Unit Cover.
Master Making Unit Cover
Master Making Unit Cover Lever
Grasp the Master Making Unit Cover Lever and
open the Master Making Unit Cover.