Riso RZ1090 User Manual page 85

8
Configure print functions.
Set various functions as needed.
9
Press the
Scanning of the 1st page of the original starts.
10
Scan all originals and make a mas-
ter.
When you set the original on the Glass Platen,
replace the original and repeat steps 8 and 9.
Repeat scanning until the set number of images
have been scanned.
If the original has less pages than the set number
of pages, touch
has been scanned. The unscanned part becomes
a blank.
Ready to scan data Layout
Page No.4
Basic Selections
Page (A4) Contrast
Auto
Line
Multi-Up D-Feed
Check
Print
Black
READY
When original scanning is complete, a master is
made and the Printing Basic Screen is displayed.
Note:
• The original is laid out in the scanned order.
• If you want to cancel the layout setting after set-
ting the number of images, perform step 2 to
display the Layout screen. Touch [OFF] and
then [OK].
key.
[Yes] after all of the original
Functions Admin.
Size Paper
A4
Id le Info
Laying out continuous originals on one sheet of paper [Layout]
Functions for Master-Making
85