Riso RZ1090 User Manual page 246

Troubleshooting
D00-000:Installation Error (in alphabetical order)
Message
Close Front Cover
Close Master Making Unit Cover
Close the ADF Cover
Install Ink Cartridge
Master Making Unit has been
Unlocked
Print Drum has been Unlocked
Print Drum (Cylinder) Not Set in Place
Press Drum (Cylinder)
Release Button and Pull Out Print Drum (Cylinder)
after the Button Lights
Rear Cover of Main Body is Off
Call Service
Set Master Disposal Box in Place
Set Master in Place
Set Master Making Unit in Place
Set Print Drum (Cylinder) in Place
246
When a Message Displays
Possible Cause
The Front Cover is open or
improperly closed.
The Master Making Unit Cover
is open or is improperly
installed.
Optional Auto Document
Feeder DX-1 cover is open or
incorrectly set.
The Ink Cartridge is improperly
installed or is missing.
The Master Making Unit is
ready to be pulled out.
The Print Drum (Cylinder) is
ready to be pulled out.
The Print Drum (Cylinder) is
locked but not pushed in
properly.
The machine rear cover is
removed.
The Master Disposal Box is
improperly set or is missing.
No master is installed.
The Master Making Unit is
missing or is improperly
installed.
The Print Drum (Cylinder) is
improperly set or is missing.
Action
Check for the magnet underneath the
Front Cover and firmly close.
Pull out the Master Making Unit, check
and firmly close its cover.
Check the ADF Cover and close it firmly.
Properly install the Ink Cartridge.
p.227
Pull out the Master Making Unit.
Pull out the Print Drum (Cylinder).
Press the Print Drum (Cylinder) Release
Button . Remove the Print Drum (Cylinder)
after the button is lit and reinstall.
Contact your dealer (or authorized service
representative).
Properly set the Master Disposal Box.
p.229
Install a Master Roll.
p.224
Properly install the Master Making Unit.
p.224
Properly install the Print Drum (Cylinder).
p.231