Riso RZ1090 User Manual page 32

Getting Acquainted
Note:
• key
key can be set to function as "Mode Selection"
or "Loop".
Select "Mode Key Pattern" on the Admin. screen.
Touch the Mode button on the Mode Screen to view
the basic screens of the various modes.
[Mode Selection]
[Loop]
32
Display
Pressing the key will open
the Mode Screen no matter
which screen you are currently
on.
The screen changes as shown
below when the key is
pressed.
• Normally: "Master Making
Basic Screen" ← → "Print Basic
Screen"
• When a Linked Printer is
connected: "Link Basic
Screen" ← → "Master Making/
Print Basic Screen"
• When the optional Document
Storage Card is installed:
"Scan Basic Screen" ← →
"Master Making/Print Basic
Screen"
Tip:
About the Recognition Screen
This machine is equipped with a User Management
function. ( p.116, p.168 "Admin."). If "User Manage-
ment" is set, the Recognition Screen is displayed. If the
one of these screens shown below is displayed, input
the PIN code or connect the registered USB Flash
Drive. Consult your administrator for the PIN code and
the registered USB Flash Drive.
PIN code Input Screen
Registered USB Flash Drive Screen