Riso RZ1090 User Manual page 251

Area
Indicated/
Blinking
Paper is jammed in the Print Drum (Cylinder)
area.
Paper did not eject correctly.
Possible Cause Action
1)
Pull out the Print Drum (Cylinder).
p.231
2)
Remove the jammed paper.
3)
Return the Print Drum (Cylinder) in place.
4)
Touch [OK].
B
Caution:
• Do not touch the separation hook or master
removal hook when putting your hand into the
unit to remove paper. The sharp tips of the
hooks can hurt your hand.
Separation Hook
1)
Check for any jammed paper on the paper
exit area.
2)
Touch [OK].
Note:
• When using special paper, adjust the
Paper Arranger on the Receiving Tray
Paper Guides according to the paper
characteristics.
p.36
When a Message Displays
Troubleshooting
251