Pressure Roller - Riso RZ1090 User Manual

Pressure Roller

If the Pressure Roller, which presses print paper against the Print Drum (Cylinder), is stained, smudged strips may
appear on the back of copies.
If this happens, gently wipe the Pressure Roller with a soft cloth dampened with alcohol.
To remove the Print Drum (Cylinder), see
B
Caution:
• Be sure to turn OFF power to the machine when cleaning the Pressure Roller.
• When putting your hand into the unit, do not touch the paper separation hook. The sharp tip of the hook can hurt your hand.
• Ink may be left on the area near the Print Drum (Cylinder), so take care not to smudge your hands or clothes. Wash
immediately with soap if you should get ink on your hands, etc.
p.231.
Separation Hook
Maintenance
239
Cleaning