Riso RZ1090 User Manual page 273

Problem
Paper is not fed smoothly from
the Paper Feed Tray.
(Skipped paper, or multiple-
sheet feeding)
Possible Cause
The angle of the Stripper Plate is
inappropriate.
Action
Turn the Stripper Plate Angle Adjustment
dial as follows;
• When the feeding skips
Turn the dial to the left.
• When multiple sheets are fed
Turn the dial to the right.
Important!:
• Before making the adjustment, be sure
to remove all paper from the Paper
Feed Tray and confirm that the tray has
lowered to the bottom.
Troubleshooting
273
Troubleshooting