Setting Up A Linked Printer [Link Properties]; Setting Up A Linked Printer - Riso RZ1090 User Manual

Setting up a Linked Printer

Linked Printer data must be entered in the machine in order to operate.
"Link Properties" are explained below.
See "Link Mode" ( p.174) for more information about Link Mode and other Admin. settings.
Important!:
• Make sure that the Linked Printer is physically connected to the machine. A Linked Printer cannot be recognized
by the machine unless physically connected.
• Enter information for each attached Linked Printer one device at a time.
• When there's only one Linked Printer to the machine, set "Linked Printer" as "One-to-One".
• Unless the Linked Printer data is entered in the machine, the device will not print, and its optional features will not
be available.
Setting up a Linked Printer
1
Touch [Link Mode] on the Admin.
screen.
Admin.
All Link Properties
Display
Linked Printer
Link-Free Volume
Default
System Duplex Interval
L i n k M o d e Online Auto-Link
Editor
2
Touch [Link Properties].
Admin.
All Link Properties
Display
Linked Printer
Link-Free Volume
Default
System Duplex Interval
L i n k M o d e Online Auto-Link
Editor
PC Network
_
20
15s
ON
P.
1/2
PC Network
_
20
15s
ON
P.
1/2
When using a Linked Printer
[Link Properties]
3
Select a tab for the Linked Printer.
L i n k P r o p e r t i e s
Printer Name
IP Address
Total Trays
Duplex
Printer Collate
Offset Pages
Note:
• Up to 6 Linked Printers may be entered.
4
Select the button to enter informa-
tion.
L i n k P r o p e r t i e s
Printer Name
IP Address
Total Trays
Duplex
Printer Collate
Offset Pages
Note:
• To display other functions that are not visible on
the screen, touch

Setting up a Linked Printer [Link Properties]

Cancel OK
LBP1
StandardTray
OFF
OFF
OFF
Cancel OK
LBP2
StandardTray
OFF
OFF
OFF
or .
205