Selecting Recognition And Identification System - Riso RZ1090 User Manual

Selecting Recognition and Identification System

Set the Recognition and Identification System using "Recognized by" in advance when setting up User Management.
Important!:
• If "Recognized by" is changed, all settings in User Management, including the administrator's registration, will be
cleared.
1
Touch [Admin.] on the Basic Screen
for each mode.
Ready to Make Master Ready to Make Master
D-Feed D-Feed
Renew Page
Check Check
Black
2
Touch [OK].
Ready to Make Master Ready to Make Master
Skip to step 4 if the administrator is not registered.
If the administrator is already registered, the Rec-
ognition Screen is displayed here.
See step 3.
3
Identify the administrator.
When "Recognized by" is set to
"PIN code"
Input the administrator's PIN code.
Ready to Make Master Ready to Make Master
When "Recognized by" is set to
"USB Flash Drive"
Connect the administrator's registered USB
Flash Drive to the USB slot.
Ready to Make Master Ready to Make Master
Setting Up User Management [User Management]
Advanced Features
119