Using Auto Page Renewal - Riso RZ1090 User Manual

Advanced Features

Using Auto Page Renewal

In order to use "Auto Page Renewal", you must enable it in "Admin." prior to use.
If "Auto Page Renewal" is activated and "Auto Page Renewal" is set to "ON", "Auto Page Renewal" can be executed
during a print job.
Important!:
• If "Auto Page Renewal" is not activated in "Admin.", "Auto Page Renewal" cannot be set to "ON".
p.173
• The "Auto Page Renewal" is set to "OFF" in the following instances.
– When printing with "Program"
– When the
– When attempting to process the next job with direct print
Note:
• The factory settings are such that a master is recreated every 1000 copies, with a setting to print 3 proofs. This set-
ting can be changed in "Admin.".
Turning ON "Auto Page Renewal"
Touch [Auto Page Renewal] on the Func-
tions Screen.
Select Print Quantity
Basic Selections
Auto Page Renewal
Internal
Job Separation
Special Paper Ctrl
"Auto Page Renewal" is activated.
When you print with these settings, "Auto Page
Renewal" will be executed after the specified number of
copies are printed.
Note:
• If [Auto Page Renewal] is grayed-out, go to "Admin."
and turn "Auto Page Renewal" ON.
p.173
154
Reproducing the Master [Renew Page][Auto Page Renewal]
or the is pressed
p.173
Functions Admin.
Counter Display
Scanning Side -ADF
Duplex(Link)
P. 4/4