Battery; Battery Charging - Dinli DL-801 Service Manual

Battery

Battery Charging

WARNING
△
Keep the battery away from sparks and open
flames during charging, since the battery gives off an
explosive gas mixture of hydrogen and oxygen. When
using a battery charger, connect the battery to the
charger before turning on the charger. This procedure
prevents sparks at the battery terminals, which could
ignite any battery gases.
The battery is a maintenance-free design and
construction. Use of conventional lead-acid batteries is not
recommended. No electrolyte or refilling water is required.
Because this battery is a completely sealed type, abuse of the
battery can cause an explosion.
Please adhere to the following points:
1. Follow the instructions shown on battery package for
preparation and filling with battery electrolyte.
2. Never interfere with the sealed state of the battery.
3. Check the charging conditions with a voltmeter (Normal
charging voltage should be 12.8V)
4. This battery may be installed on if replaces a similar
sealed type battery.
5. Keep away from high temperature of fire.
6. In the case of an accident sulfuric acid may escape. Avoid
contact with skin, eyes or clothing.
Charging Method
Normal Charge: 1.2A
Fast Charge
New Battery:
Use of conventional lead-acid batteries is not recommended.
Batteries must be
CAUTION
NEVER attempt to add electrolyte or water to the
maintenance-free design and construction. Doing so will
damage the case and shorten the life of the battery.
5~10 hrs
: 4.0A 0.5 hrs
【7-7】
ELECTRICAL SYSTEM