Cylinder/Piston - Dinli DL-801 Service Manual

CYLINDER/PISTON

REMOVAL
● Remove the cylinder head. (Refer to "Cylinder
Head/Valves")
● Remove the two dowel pins, cylinder head gasket and cam
chain guide.
● Disconnect the water hose.
● Remove the cylinder
● Remove the cylinder gasket and dowel pins.
● Clean any gasket material from the cylinder surface.
NOTE:
Be careful not to drop foreign matters into the crankcase.
● Remove the piston pin clip.
NOTE:
Be careful to keep the piston pin clip from falling into the
crankcase.
● Press the piston pin out of the piston and remove the piston.
【6-15】
ENGINE