Cylinder Head Cover; Camshaft/Camshaft Holder - Dinli DL-801 Service Manual

CYLINDER HEAD COVER

REMOVAL
● Remove the four bolts at the cylinder head cover and then
remove the cylinder head cover.
INSTALLATION
● Install a new cylinder head cover O-ring and install the
cylinder head cover.
● Install and tighten the cylinder head cover bolts.
Torque: 0.8_ 1.2kgf-m
NOTE:
Be sure to install the O-ring into the groove properly.

CAMSHAFT/CAMSHAFT HOLDER

REMOVAL
● Remove the cylinder head cover. (Refer to the cylinder head
cover removal)
● Remove the cam chain tensioner cap screw and the O-ring.
● Turn the cam chain tensioner screw clockwise to tighten it
as show.
【6-7】
ENGINE