Transmission Case Cover - Dinli DL-801 Service Manual

ENGINE

TRANSMISSION CASE COVER

REMOVAL
● Drain transmission gear oil into a clean container.(Refer to
"Engine Removal" section)
● Remove drive sprocket cover and drive sprocket. (Refer to
"Engine Removal" section)
● Remove the drive select lever. (Refer to "Engine Removal"
section)
● Remove the transmission case cover attaching bolts.
● Remove the transmission case cover, dowel pins and gasket.
● Inspect the bearings for allow play in the transmission case
cover or the bearings turn roughly.
If any defects are found, replace the bearing with a new one.
【6-26】