CRANKCASE/CRANKSHAFT/BALANCE
SHAFT
SERVICE INFORMATION
GENERAL INSTRUCTIONS
This section covers crankcase separation to service the
crankshaft. The engine must be removed for this operation.
The following parts must be removed before separating the
crankcase.
Cylinder head/Cylinder/piston/Drive and driven pulleys
/A.C. generator/Starter clutch/Oil pump
SPECIFICATIONS
Connecting rod big end side clearance
Crankshaft
Connecting rod big end radial clearance
Run out
TORQUE VALUES
Crankcase bolt
Cam chain tensioner slipper bolt
Cam chain cover bolt
Item
1.0 – 1.4kgf-m
1.0 – 1.4kgf-m
1.0 – 1.4kgf-m
【6-33】
ENGINE
Standard (mm)
Service Limit (mm)
0.15 – 0.35
0.004 – 0.013
0.03
0.60
0.05
0.10