Table of Contents
Advertisement
BRAKE
Brake Pedal Position Inspection
●Check that the brake pedal [A] is in the correct position as
shown.
[B] step
Pedal Position [C]
Standard:
If it i
s correct, adjust the brake pedal position.
★
Brake Pedal Position Adjustment
●Remove the brake pedal (see Brake Pedal Removal).
●Loosen the nut [A], and turn the bracket [B] until pedal is
correctly positioned.
●Tighten the nut [A].
●Check the brake pedal free play (see Brake Pedal Free Play
Inspection).
Brake Pedal Free Play Inspection
●Check the brake pedal free play [A].
○Depress the brake pedal lightly by hand until the brake is
applied.
If the free play is incorrect, adjust it.
★
Pedal Free Play
Standard:
Brake Pedal Removal
●Remove:
Cir-clip [C]
Washer [D]
Pin [B]
Master Cylinder Joint [A]
●Pulling down the springs [A][B], remove the brake pedal.
Brake Pedal Installation
●Please reverse the Removal steps to install the brake pedal.
49.8 ~ 54.8 mm above footrest
2.6 ± 0.5 mm
【3-10】
Advertisement
Chapters
Table of Contents
