Dinli DL-801 Service Manual page 82

ENGINE
TRANSMISSION CASE COVER
DISASSEMBLY
● Remove the drive axle cir-clip.
● Remove the drive axle from the transmission case cover.
● Remove the bearing.
● Inspect the bearing for allow play in the transmission case
cover or the bearing turns roughly.
If any defects are found, replace the bearing with a new one.
● Inspect the drive axle gear teeth for wear or damage.
● Remove the bearing to expose the oil seal.
● Inspect the oil seal for wear or damage.
If any defects are found, replace the oil seal with a new one.
【6-27】