Transmission - Dinli DL-801 Service Manual

ENGINE
● Inspect the needle bearing for allow play in the transmission
case cover or the bearing turns roughly.
If any defects are found, replace the bearing with a new one.
ASSEMBLY
● Install the needle bearing.
● Install the oil seal and bearing.
● Install the bearing cir-clip.
● Install the drive axle and drive axle cir-clip.

TRANSMISSION

REMOVAL
● Remove the transmission cover. (Refer to
"TRANSMISSION CASE COVER REMOVAL")
● Check the transmission operation.
Unsmooth operation – Repair.
● Remove the shift shaft.
【6-28】