I/O Signal When Cc-Link Ver.2 Quadruple Setting Is Selected (Pr. 544 = 114) - Mitsubishi Electric FR - F700 Programming Manual

CC-Link I/O specifications
2.3.3 I/O signal when CC-Link Ver.2 quadruple setting is selected
(Pr. 544 = 114)
The device points usable in CC-Link communication are 32 input (RX) points (12
points are available for PLC function), 32 output (RY) points (12 points are available
for PLC function), 8 remote register (RWr) points and 8 remote register (RWw) points.
(1) Remote I/O
Same as when Pr. 544 = 112 (
(2) Remote register
PLC Function
Address
Device No.
⎯ RWwn
⎯
RWwn+1
⎯
RWwn+2
⎯
RWwn+3
⎯
RWwn+4
⎯
RWwn+5
⎯ RWwn+6
⎯
RWwn+7
D9062 RWwn+8
D9063 RWwn+9
D9064 RWwn+A
D9065 RWwn+B
D9066 RWwn+C
D9067 RWwn+D
D9068 RWwn+E
D9069 RWwn+F
("n" indicates a value determined according to the station number setting.)
60
Refer to page 58)
Description
Upper 8 Lower 8
Bits Bits
Monitor Monitor
code 2 code 1
Set frequency
(0.01Hz increments)
Link
Instruction
parameter
code
expansion
setting
Write data
Monitor code 3
Monitor code 4
Monitor code 5
Monitor code 6
Registers designed to
read data received
from the master
station
PLC Function
Address
Device No.
⎯ RWrn
⎯
RWrn+1
⎯
RWrn+2
⎯
RWrn+3
⎯
RWrn+4
⎯
RWrn+5
⎯ RWrn+6
⎯
RWrn+7
D9078 RWrn+8
D9079 RWrn+9
D9080 RWrn+A
D9081 RWrn+B
D9082 RWrn+C
D9083 RWrn+D
D9084 RWrn+E
D9085 RWrn+F
Description
First monitor value
Second monitor
value
Reply Reply
code2 code1
Read data
Third monitor value
Fourth monitor value
Fifth monitor value
Sixth monitor value
Registers designed
to write data to be
sent to the master
station.